Customer in Hydrocarbon Processing Industry "We have successfully used Thermbond Formula 6B for ethylene cracking furnace burner tile for over 15 years. A great improvement in tile life was a very positive result...
Customer in Hydrocarbon Processing Industry “Personnel from Thermbond will most likely be getting in contact with you regarding Thermbond refractory materials. I know that some of you have used the product before but it’s a good reminder going into the major. Going into the...
Customer in Hydrocarbon Processing Industry "We have been making quality precast shapes using Thermbond refractory since 1996. Applications have been primarily in the refining/petrochem and power industry. Our clients have been extremely pleased with the long term performance of the refractory, and ICSC's ability...
Customer in Hydrocarbon Processing Industry "We have successfully installed Thermbond products in many areas of our Ethylene furnaces since 2001. We have replaced standard convectional water based refractory with an exothermic Thermbond. We are very pleased with its unique benefits, including cure out, which...
Customer in Steel Industry We are market leader as manufacturer of heads (disher ends) and closures. In our forge, the availability of our walking beam furnace is a substantial component of our production run. In these days of full production a refractory repair normally...
Customer in Steel Industry As we discussed we have done a complete reline on two Seco/Warwick WBT-60 tilting barrels with select Stellar materials. This work was performed under the direction of Pete Billie, Stellar’s technical advisor. The first furnace has been in service for...
Customer in Aluminum Industry...
Customer in Aluminum Industry "I would like to take the opportunity to say “Thanks” for the exceptional manufacturing and delivery service to us over the Labor Day weekend. As one of Thermbond’s major distributor, we were tasked with providing four (4) separate shipments of...
Customer in Aluminum Industry We have used Thermbond for 2 years now to patch our 2 aluminum remelt furnaces. We have found that using Thermbond 4-P for patching below the metal line and Thermbond 5-P above the metal line bonds and holds up longer...
Customer in Aluminum Industry Mercury Marine has had good success using Thermbond castables and gun mixes in their furnace maintenance. Mercury melting operations need to keep up with production and this means that they are near furnace capacity to do so. The typical repair...