Customer in Aluminum Industry All the furnaces are lined with Thermbond. En base a la experiencia que hemos tenido en el uso del Thembond 3L,4L,5L te puedo comentar lo siguiente: Presentación Bulto y líquido es buena y ayuda a la preparación el que sea...
“I have used Thermbond years ago, tried other products and came back to Thermbond last year. After one year in operation I confirm again that Thermbond is the best material I have ever used in my furnaces. I make aluminum, but also corundum in my...
Customer in Aluminum Industry Use of Thermbond products Hydro Production Partner has successfully used Thermbond products for different applications for the last 7 years. Thermbond has been used in aluminum smelters as well as in different parts in ammonia plants worldwide. The reason for...
Customer in Aluminum Industry We have used Formulas 3L, 4L, 6L, 4G, and 4P throughout our casthouse and have found no other material that will bond like it. We have used Thermbond in full wall replacement applications all the way down to veneering. The...
Customer in Aluminum Industry FS Sperry wrote testimonal (Aisin is end user)"With a joint effort from the customer, the contractor, and Stellar Materials, a long-term study was conducted to analyze the power requirements and heat loss of the current lining configuration in the holding...
Customer in Aluminum Industry "We are repairing our melting Al-furnace once a year now for 5 years using only Thermbond. Since we are using Thermbond we see it very easy to clean the furnace and to remove slag and Aluminum. The furnace repair is...
Customer in Aluminum Industry “It is pretty good ! You can count with my referral . Other day we scraped the dross of the wall with the skin of aluminum semi-solid. With the furnace hot is even easier. Besides that, the furnace doesn't lose...
Customer in Aluminum Industry We have been utilizing Thermbond Refractories in our furnaces for over 3 years now with great success. The Formula 4-L is used below the metal line in critical areas such as the hearth. The Formula 5-L is used above the...
Customer in Aluminum Industry Thermbond formula 2104L was installed as a repair to the most severe wear furnace hearth. Refractory repairs to this hearth area have been very unsatisfactory in the past. The failure has been at the bond to the existing sub hearth....
Customer in Aluminum Industry As a refractory contractor-installer in the aluminum industry, we have achieved great results utilizing THERMBOND products. We have found that the combination of high alumina, non-wetting characteristics and rapid set-up allow us to install durable, long-lasting working linings in a...