Customer in Hydrocarbon Processing Industry "We have successfully installed Thermbond products in many areas of our Ethylene furnaces since 2001. We have replaced standard convectional water based refractory with an exothermic Thermbond. We are very pleased with its unique benefits, including cure out, which...
Customer in Steel Industry We are market leader as manufacturer of heads (disher ends) and closures. In our forge, the availability of our walking beam furnace is a substantial component of our production run. In these days of full production a refractory repair normally...
Customer in Steel Industry As we discussed we have done a complete reline on two Seco/Warwick WBT-60 tilting barrels with select Stellar materials. This work was performed under the direction of Pete Billie, Stellar’s technical advisor. The first furnace has been in service for...
Customer in Incineration Industry Fisia Babcock has been specifying Thermbond Refractories in new waste incineration plants all over Europe for several years. We like Thermbond because it sets fast, has high strengths even at ambient temperatures, and is not sensitive to fast heat up....
Customer in Aluminum Industry We got in contact with Thermbond-products by the representatives of your European Headquarters. The advantages of these products convinced us. We are using Formula -Products and Phoscrete Hotfloor in our three melting furnaces with a good performance for three years...
Customer in Aluminum Industry...
Customer in Aluminum Industry "I would like to take the opportunity to say “Thanks” for the exceptional manufacturing and delivery service to us over the Labor Day weekend. As one of Thermbond’s major distributor, we were tasked with providing four (4) separate shipments of...
Customer in Aluminum Industry We have used Thermbond for 2 years now to patch our 2 aluminum remelt furnaces. We have found that using Thermbond 4-P for patching below the metal line and Thermbond 5-P above the metal line bonds and holds up longer...
Customer in Aluminum Industry Mercury Marine has had good success using Thermbond castables and gun mixes in their furnace maintenance. Mercury melting operations need to keep up with production and this means that they are near furnace capacity to do so. The typical repair...
Customer in Aluminum Industry Thermbond,s use at this facility has grown over the past 10 years. GM/Bedford first used Thermbond for small emergency repairs and now use it for full maintenance applications. This Bedford plant is part of a large automotive production system. Bedford...