Customer in Power Generation Industry We have had a local contractor gunite Thermbond Formula 6-AG for 2 years now to do all of our burner throat repairs as well as new refractory throats. Thermbond Formula 6-AG holds up better than any other refractory to...
Customer in Power Generation Industry There are 96 gas fired burner throats that we have repaired as well as new installation of burner throats using Thermbond Formula 6-AG for gunning an overlay and new throat linings. We have also used Thermbond Formula 15-R for...
Customer in Power Generation Industry Southern California Edison in Laughlin, NV has used Thermbond Formula 6-AG in their ash hoppers for many years. They liked the fact that Thermbond did not need any outside heat source to attain good strengths. They would normally have...
Customer in Power Generation Industry As far as the installation, we successfully installed the Thermbond materials using the tools recommended in the Installation Guide. With the fast setting of the Formula 6P it really helped us to finish the job on time. GREAT PRODUCT....
Customer in Hydrocarbon Processing Industry We have used Thermbond refractory quite extensively for a number of years mostly in our Sulfur Recovery Units within the furnaces. The furnaces that we run are approximately 17 feet in diameter and about 100 feet long and run...
Customer in Hydrocarbon Processing Industry Thermbond has really helped when we want to startup quickly. It typically takes about an entire day out of the dry-out procedure. Depending on the unit, an extra day of downtime could be very costly. For instance, when we...
Customer in Hydrocarbon Processing Industry We were discussing the Burner cans with the Formula 6-L linings, my clients have increased their number of units due to the fact they are getting a more prolonged life now than with conventional castable. We also use Formula...
Customer in Hydrocarbon Processing Industry The Formula 6P repair is holding up fine. We saved 8 to 12 hours on the start-up of the unit by not having to cure the refractory. We are installing Formula 6P in April for a boiler repair....
Customer in Hydrocarbon Processing Industry Thermbond Formula 403G and Formula 18G was installed in a boiler that had to be back in service in two days. The call went out to Stellar on the weekend and the material was delivered on time. Because of...
Customer in Hydrocarbon Processing Industry I have used Thermbond successfully in TLE's and different applications where conventional refractories were failing. Thermbond has performed as promised, and I will continue to use Thermbond in the future....